![background image](http://html1.mh-extra.com/html/tdsi/sologarde/sologarde_user-manual_3896942033.webp)
Remove power from the SOLOgarde controller
Move the jumper so that it is on both pins of Reset Link JP4
JP4
JP4
JP4
Apply power to the SOLOgarde controller
The controller will emit a series of bleeps from the sounder to indicate that it has been reset
Remove power from the SOLOgarde controller
Remove (or park) the jumper from the Reset Link JP4
JP4
JP4
JP4
Apply power to the controller. The controller is now reset and ready for programming.
5.1.4.2
5.1.4.2
5.1.4.2
5.1.4.2
Resetting the Controller Using the Hand
Resetting the Controller Using the Hand
Resetting the Controller Using the Hand
Resetting the Controller Using the Hand----Held Programmer
Held Programmer
Held Programmer
Held Programmer
Turn the hand-held programmer on by pressing and holding the power button on
the top and connect it to the bottom of the reader and log-in to the controller by
entering the 4-digit password followed by the *
**
* button. For more details on
logging-in and the password feature, please refer to section 4.2 of this manual.
Ensure that the ACU
ACU
ACU
ACU menu option is highlighted (flashing) and press the *
**
* key to
select it.
Press the
key to highlight Reset
Reset
Reset
Reset and press the *
**
* key to accept the selection.
Press the
key to highlight ACU
ACU
ACU
ACU and press the *
**
* key to accept the selection.
Confirm (1
st
time) that the controller is to be reset. If so, use the
key to
highlight OK
OK
OK
OK and press the *
**
* key to proceed to the next step. To abort the
process, highlight Esc
Esc
Esc
Esc and press the *
**
* key.
Confirm (2
nd
time) that the controller is to be reset. If so, use the
key to
highlight OK
OK
OK
OK and press the *
**
* key to proceed to reset the controller. The
controller will emit a single bleep indicating that the controller has been reset.
To abort the process, highlight Esc
Esc
Esc
Esc and press the *
**
* key.
Sure?
Esc OK
Reset
Esc OK
Alarm
ACU
Reset
Sys Info
ACU
Card