![background image](http://html1.mh-extra.com/html/tdsi/sologarde/sologarde_user-manual_3896942013.webp)
Figure
Figure
Figure
Figure 9
9
9
9 –––– Wiring the Door Lock (Fail Secure Oper
Wiring the Door Lock (Fail Secure Oper
Wiring the Door Lock (Fail Secure Oper
Wiring the Door Lock (Fail Secure Operation)
ation)
ation)
ation)
Door Lock
Door Lock
Door Lock
Door Lock –––– Fail Secure
Fail Secure
Fail Secure
Fail Secure
Connect the door lock between the +12 V supply
and the Com terminal. Link the 0V and N/O
terminals.
Note: A suppression diode MUST be fitted at
Note: A suppression diode MUST be fitted at
Note: A suppression diode MUST be fitted at
Note: A suppression diode MUST be fitted at
the door lock. Failure to do so may result in
the door lock. Failure to do so may result in
the door lock. Failure to do so may result in
the door lock. Failure to do so may result in
permanent irreparable damage t
permanent irreparable damage t
permanent irreparable damage t
permanent irreparable damage to the
o the
o the
o the
controller.
controller.
controller.
controller.
Figure
Figure
Figure
Figure 10
10
10
10 –––– Wiring an External Alarm Device
Wiring an External Alarm Device
Wiring an External Alarm Device
Wiring an External Alarm Device
External Alarm
External Alarm
External Alarm
External Alarm
The Alarm output is capable of driving an external
alarm device up to 1A. Connect the unit between
the Alarm + and Alarm – terminals. Fit the link JJJJP2
P2
P2
P2
to supply the external device with power from the
SOLOgarde PCB.
Figure
Figure
Figure
Figure 11
11
11
11 –––– Wiring the Door Contact
Wiring the Door Contact
Wiring the Door Contact
Wiring the Door Contact
Door Sense
Door Sense
Door Sense
Door Sense
Wire a door contact (normally open type) between
the Sense
Sense
Sense
Sense and Common
Common
Common
Common terminals. Make sure that
the Door Sense Bypass Link jumper JP5 (circled) is
not fitted.
+12 V