TDSi SOLOgarde, User Manual

Page: 18 / 37

3.1.3 3.1.3 3.1.3 3.1.3 Adding Cards using the Hand Adding Cards using the Hand Adding Cards using the Hand Adding Cards using the Hand----Held Held Held Held Programmer Programmer Programmer Programmer (Mifare or EXprox (Mifare or EXprox (Mifare or EXprox (Mifare or EXprox Cards Cards Cards Cards))))
The hand-held programmer provides a convenient method of adding a single card or blocks of card numbers.
3.1.3.1
3.1.3.1 3.1.3.1
3.1.3.1 Adding a Single Card
Adding a Single Card Adding a Single Card
Adding a Single Card
Turn the hand-held programmer on and connect it to the bottom of the reader or
the USB socket on the Wall Mounting Box and log-in to the controller by entering
the 4-digit password followed by the *
** * button. For more details on logging-in and
the password feature, please refer to section 4.2 of this manual.
Press the key until the Card Card Card Card option is highlighted (flashing). Press the * ** * key to
select it.
Ensure that the Add
Add Add
Add option is highlighted and press the *
**
* key to select.
With the Single Single Single Single option selected, press the * ** * key to select.
Either enter the card number using the numeric keypad or simply present the card
to be added to the reader. The card number will automatically appear on the
programmer display. Once the card number has been entered, press the *
** * key to
store it.
If the card is already in the memory the programmer will show this by Replace? Replace? Replace? Replace?
being displayed. To overwrite the card information with the new data that is to
be entered, use the
key to highlight OK OK OK OK and press the * ** * key to replace the card.
To abort the process, highlight Esc Esc Esc Esc and press the * ** * key.
Hint Hint Hint Hint: it is not necessary enter the full number, for example for the card number 00485525 just : it is not necessary enter the full number, for example for the card number 00485525 just : it is not necessary enter the full number, for example for the card number 00485525 just : it is not necessary enter the full number, for example for the card number 00485525 just
485525 can be entered followed by the *
485525 can be entered followed by the * 485525 can be entered followed by the *
485525 can be entered followed by the * key
key key
key....
The programmer now displays a number of options that allow the properties of
the card to be tailored. The first option is the card Mode
Mode Mode Mode. Press the * ** * key to view
and change the options for the card Mode
Mode Mode
Mode. These are:
Card
Card Card
Card (the default setting) where the user is required to present only a card in
order to gain access
Crd+PIN
Crd+PIN Crd+PIN
Crd+PIN where the user is required to present their card followed by a
Personal Identification Number (PIN) using the reader keypad.
1
Crd+Code Crd+Code Crd+Code Crd+Code where the user is required to present their card followed by a
global code using the reader keypad.
1
Use the
or keys to highlight your required card Mode Mode Mode Mode and press the * ** * key to
select it.
Replace?
Esc OK
Mode
Time Grp
Number
00485525
Single
Block
Add
Delete
Card
Keypad