TDSi SOLOgarde, User Manual

Page: 22 / 37

3.2 3.2 3.2 3.2 Editing Cards Editing Cards Editing Cards Editing Cards
The properties of existing cards in the system can be changed using the SOLOgarde hand-held programmer.
3.2.1
3.2.1 3.2.1
3.2.1 Editing a Single Card
Editing a Single Card Editing a Single Card
Editing a Single Card
Turn the hand-held programmer on and connect it to the bottom of the reader or
the USB socket on the Wall Mounting Box and log-in to the controller by entering
the 4-digit password followed by the *
** * button. For more details on logging-in and
the password feature, please refer to section 4.2 of this manual.
Press the key until the Card Card Card Card option is highlighted (flashing). Press the * ** * key to
select it.
Press the key until the Edit
Edit Edit
Edit option is highlighted (flashing) and press the *
**
* key
to select it.
With the Single Single Single Single option selected, press the * ** * key to select.
Either enter the card number using the numeric keypad or simply present the card
to be edited to the reader. The card number will automatically appear on the
programmer display. Once the card number has been entered, press the *
** * key to
enter it.
If the card number entered is not in the memory of the SOLOgarde Invalid Invalid Invalid Invalid is
displayed. You are then prompted to enter a valid card number.
Hint: it is not necessary enter the full number, for example for the card numb Hint: it is not necessary enter the full number, for example for the card numb Hint: it is not necessary enter the full number, for example for the card numb Hint: it is not necessary enter the full number, for example for the card number 00485525 just er 00485525 just er 00485525 just er 00485525 just
485525 can be entered followed by the *
485525 can be entered followed by the * 485525 can be entered followed by the *
485525 can be entered followed by the * key
key key
key....
The programmer now displays a number of options that allow the properties of
the card to be tailored. The first option is the card Mode
Mode Mode
Mode. Press the *
**
* key to view
and change the options for the card Mode
Mode Mode
Mode. These are:
Card
Card Card
Card (the default setting) where the user is required to present only a card in
order to gain access
Crd+PIN Crd+PIN Crd+PIN Crd+PIN where the user is required to present their card followed by a
Personal Identification Number (PIN) using the reader keypad.
1
Crd+Code Crd+Code Crd+Code Crd+Code where the user is required to present their card followed by a
global code using the reader keypad.
1
Use the
or keys to highlight your required card Mode Mode Mode Mode and press the * ** * key to
select it.
Mode
Time Grp
Invalid
Number
00485525
Single
Block
Edit
Delete
Card
Keypad