TDSi SOLOgarde, User Manual

Page: 19 / 37

The next option is the Time Group Time Group Time Group Time Group in which the user(s) are to be members of.
Press the * ** * key to view and change the options for the Time Group.
TZ1 TZ1 TZ1 TZ1 (the default setting). Members of the Time Zone 1 group are valid when
the Time
Time Time Time input is off (i.e. high or at +12 V).
TZ2 TZ2 TZ2 TZ2. Members of the Time Zone 2 group are valid when the Time Time Time Time input is on
(i.e. low or at 0 V)
TZ1 +TZ2
TZ1 +TZ2 TZ1 +TZ2
TZ1 +TZ2. Members of the Time Zone 1 plus Time Zone 2 group are valid
regardless of the state of the Time input.
Use the
or keys to highlight your required Time Group
Time Group Time Group
Time Group and press the *
**
* key
to select it.
The final option is the card Type Type Type Type. Press the * ** * key to view and change the options
for the card Type Type Type Type.
Standard Standard Standard Standard (the default setting). The lock time that has been set up in the
controller will apply to this card.
DDA DDA DDA DDA. The lock time that will apply to the card will be double that of the lock
time set in the controller, allowing more time for the person to pass through
the door.
Toggle Toggle Toggle Toggle. The card will toggle the state of the door relay. This is particularly
useful for temporarily unlocking a door for example
a meeting room or
lecture theatre or setting
unsetting of an intruder panel.
Use the
or keys to highlight your required card Type
Type Type
Type and press the *
**
* key to
select it.
Once all of the options have been set, it is time to validate the card. Ensure that
the Validate
Validate Validate Validate option is highlighted (flashing) and press the * ** * key.
Confirm the entry by pressing the * ** * key once again. The controller will emit a
single bleep to indicate that programming of the card has been successfully
completed. Once the card has been added to the system OK
OK OK OK is displayed. If the
display shows Mem Full Mem Full Mem Full Mem Full then the controller memory is full. Delete some unused
cards to make room for the new card(s) – refer to section 0 of this manual.
Hint: if you want to u
Hint: if you want to u Hint: if you want to u
Hint: if you want to use the default settings for each of the options card Mode, Time Group and
se the default settings for each of the options card Mode, Time Group and se the default settings for each of the options card Mode, Time Group and
se the default settings for each of the options card Mode, Time Group and
Type, once you have entered the card number, you can simply scroll down to the Validate option
Type, once you have entered the card number, you can simply scroll down to the Validate option Type, once you have entered the card number, you can simply scroll down to the Validate option
Type, once you have entered the card number, you can simply scroll down to the Validate option
(using the
(using the (using the
(using the button) and press the * key to validate the card quickly.
button) and press the * key to validate the card quickly. button) and press the * key to validate the card quickly.
button) and press the * key to validate the card quickly.
1
certain versions only.
Add
Confirm?
Validate
Mode
Type
Validate
Time Grp
Type