78
SDA³ / SDA³ E - Rev.04 - Mar / 22
9. Optional
C
C
D
D
E
E
F
F
G
G
H
H
Couple the row units to the seeder frame, observing the recommendations for the
number of even and odd row units, according to the 'spacing between row units table' page.
To assemble the row units, use the same rods with springs that comes with the seeder.
Pass the hexagonal axle (C) through the front part of the seed row unit. Then, couple
the bearing (D), along with the lower sprocket (E).
Assemble the chain tightener, the upper sprocket and then couple the chain.
Large seeds row unit transmission assembly
NOTE
- Be careful with the correct chain assembly related to the tightener.
Remove the hopper lids and fasten the nozzle (F), along with the conducting hoses (G).
Couple the stabilizer bar (H) to the seed row units.
