89
SDA³ / SDA³ E - Rev.04 - Mar / 22
10. Maintenance
Cleaning the seed and fertilizer hoppers
A
A
C
C
B
B
Remove the seed (A) and fertilizer (B) tubes completely. Wash them using water and
neutral soap. Wash the seed and fertilizer hoppers using only water.
Loosen up the seed meterings (C) totally to let the outputs free.
Spray some water again on the fertilizer hopper axles after turning their axles using a
19 mm
(
3/4"
) wrench.
Remove all transmission chains (seed and fertilizer) after the sowing process. Clean
them up and store them in a recipient with oil until the next sowing.
When restarting the job, turn the seed and fertilizer hopper axles before placing the
chains to check if they are not locked using a
19 mm
(
3/4"
) wrench.
