65
SDA³ / SDA³ E - Rev.04 - Mar / 22
9. Optional
A
A
B
B
C
C
D
D
Hydraulic activation assembly - SDA³E
In this case, the tractor needs a double command (with four rear outputs).
- Fasten the oil distributor (A) to the frame using bolts (B), flat and spring washers and
nuts;
- Assemble the sequence valve (C) to the frame center using bolts (D) and flat and
spring washers;
- Assemble the triple valve to the drawbar according to the instructions on the 'actvation
assembly' page. Also, check the 'triple valve operation' page;
- Assemble the hoses according to the 'hydraulic circuit' page. Check if the ports are
clean and avoid that they touch the soil.
- If necessary, use thread sealing tape to couple the hoses.
NOTE
