105
SDA³ / SDA³ E - Rev.04 - Mar / 22
10. Maintenance
Tires inflation
SDA³ - equipped with two 12.4/11 x 28 tires - 6 ply (30 PSI).
SDA³E 15, 19 21 and 23 - equipped with two 12.4/11 x 28 tires - 6 ply (24 PSI).
SDA³E 27 and 29 - equipped with two 14.9 x 28 tires - 8 ply (26 PSI).
For the longitudinal transportation:
SDA³ / SDA³E - with two 7.50 x 16 tires - 10 ply (60 PSI).
- If the maximum pressure is not specified on the tires, consult the tire manufacturer
and adopt the pressure informed by them.
NOTE
The tires must always be properly inflated to avoid premature wear for excess or lack
of pressure.
Do not attempt to mount the tires without experience and adequate storage.
Maintain the correct tire pressure. Never inflate the tires beyond the recommended
pressure.
Never weld or heat a wheel. The heat can cause increase in pressure, with a risk of
tire explosion.
Welding can compromise the structure of the wheel or distort it.
When filling the tires, make sure the hose is long enough for you to stand. Also, do
this process in a safety cage.
Excess of
Excess of
pressure
pressure
Lack of
Lack of
pressure
pressure
Correct
Correct
pressure
pressure
