25
SDA³ / SDA³ E - Rev.04 - Mar / 22
5. Assembly
Triple valve operation
Position 1
- To operate both cylinders simultaneously.
Position 2
- To operate the right cylinder.
Position 3 -
To operate the left cylinder.
Hydraulic activation assembly - SDA³E
The SDA³E hydraulic cylinder needs double command. In other words, the tractor must
have four rear outputs.
1. Fasten the oil dispenser (A) to the support, which is placed in the frame using bolts
(B), flat and spring washers and nuts.
2. Fasten the support (C) of the triple valve to the drawbar using bolts (D), spring
washers and nuts.
3. The triple valve (E) is fastened to the support (C) along with bolts and spring washers.
4. Assemble the hoses. Observe if the ports are clean and avoid that they touch the soil.
A
A
B
B
C
C
E
E
D
D
- Positions 2 and 3 are used to make final touches, allowing to activate just half of
the equipment.
NOTE
Position 1
Position 1
Position 2
Position 2
Position 3
Position 3
