TATA Motors Zest Owner'S Manual Download Page 72

Page: 72 / 166

FATC - FULLY AUTOMATIC TEMPERATURE CONTROL

CLIMATE CONTROLS

NOTE

1. Do not cover or spill any liquid

on sensors.

2. Do not cover sensor, this may

cause the sensor to malfunc-
tion.

This may lead to FATC not
functioning to desired level.

If your vehicle is parked under the
sun, you can cool it down fast by
following the steps given below :

Start the engine

Turn on A/C by pressing the
button. Make sure the temperature
control is set to maximum cool.

In case of FATC set temperature
to ‘Low’ mode.

Set the fan to maximum speed. (for
ETC ,manual HVAC variants)

Open windows half , set air direc-
tion towards face and fresh air
mode.

When the interior has cooled down
to a more comfortable level, close
windows and set the controls as
required in normal cooling, with
recirculation mode ON.

Summary of Contents for Zest







































































































































































Search results

Summary of Contents for Zest

Reviews:

Related manuals for Zest

Brands by name

Popular brands

TATA Motors Zest, Owner'S Manual

Search results

Summary of Contents for Zest

Reviews:

Related manuals for Zest

Brands by name

Popular brands