TATA Motors Zest Owner'S Manual Download Page 29

Page: 29 / 166

OPENING & CLOSING

DOOR OPENING & CLOSING

DOOR OPENING / CLOSING :

Locking / unlocking door with key:

Front driver door has separate locking
facility. All doors can be locked or
unlocked from outside using the E-key.

Insert the E-key and turn it anti-
clockwise to open or clockwise to lock
the door. Pull the Door handle to open
the unlocked door.

Location of door opening / locking
lever.

Locking without a key from inside:

All the doors can also be locked or
unlocked independently from inside by
pressing or pulling the knob (1).

Press

to lock and

Pull

to unlock.

NOTE

When locking doors this way, do not
leave the key inside the vehicle.

Opening the doors from inside :

All doors can be opened from inside.
To open, pull the door opening knob
(1) and then lever (2).

Summary of Contents for Zest







































































































































































Search results

Summary of Contents for Zest

Reviews:

Related manuals for Zest

Brands by name

Popular brands

TATA Motors Zest, Owner'S Manual

Search results

Summary of Contents for Zest

Reviews:

Related manuals for Zest

Brands by name

Popular brands