TATA Motors Zest Owner'S Manual Download Page 158

Page: 158 / 166

158

VALUE ADDED SERVICE

CAR CARE & VALUE ADDED SERVICE

Vehicle Interior Enrichment

Why protect your new car’s fabric interior ?

•

Someone will soil your vehicle's fabric carpet or seats.

•

A significant detractor from your vehicle's resale value.

•

A permanent stain on your vehicle's interior fabric.

The enemy :

Drink Spills - Food Stains - Mud - Ultraviolet Rays Pets - Traffic

Benefits:

Vehicle Interior Enrichment

•

Removal of medium stains and dirt from all interior parts of the car i.e carpet, upholstery and roof lining.

•

Cleaning of windshield and all windows (inside and outside)

•

Dressing of all internal plastics (eg: door pad trims )and rubber parts.

•

The treatment involves cleaning and dressing of All parts of the exposed interiors.

•

Specialised protection for seat fabric from liquid spills.

TATA MOTORS

has tied up with

M/s Wurth and M/s M/s Autokrom

for this world class treatment at affordable prices.

This treatment is available in all authorized workshops. The Dealer Service Marketing Executive will explain to you the
benefits and terms and conditions of this treatment.

I / We have been explained the Terms and conditions, Coverage and Owner’s responsibility by the Dealer Service Marketing

Executive.

I wish to avail / Do not wish to avail extended warranty

Customer’s Sign Dealer’s Sign

Summary of Contents for Zest







































































































































































Search results

Summary of Contents for Zest

Reviews:

Related manuals for Zest

Brands by name

Popular brands

TATA Motors Zest, Owner'S Manual

Search results

Summary of Contents for Zest

Reviews:

Related manuals for Zest

Brands by name

Popular brands