116
BULB REPLACEMENT
EMERGENCY & BREAK DOWN ASSISTANCE
07
•
Insert the new bulb (without touch-
ing the glass) into the bulb holder.
•
To lock the socket on headlamp
housing, rotate the front turn sig-
nal socket plug assembly clock-
wise until it fits properly.
Replacing turn indicator, reverse,
stop lamp :
•
Lift the trunk lid to access the tail
lamp's mounting screws inside the
boot carpet.
•
Slightly remove the boot carpet by
pulling out the plastic rivets. To
remove plastic rivets, first pull the
center pin and then rivet.
•
Carefully slide out tail lamp assem-
bly to release the two mounting lugs
and tail lamp catcher provided as
shown in fig. Take out the tail lamp
assembly.
•
Rotate the bulb holder in anti-clock
wise direction to unlock the bulb
holder.
•
Remove the tail lamp mounting
screws.
Tail lamp catcher
