73
PRE-DRIVING CHECKS
STARTING & DRIVING
06
PRE-DRIVING CHECKS:
ENSURE
1. Bonnet is properly closed and
locked.
2. All doors are properly closed and
locked.
3. Check that the items you may be
carrying inside with you are stored
properly or fastened securely
4. Seat belts are fastened.
5. All mirrors, windows and outside
lights are clean and viewable.
6. All switches and lamps are work-
ing.
7. All the gauges and indicators in
the instrument cluster are work-
ing.
8. Gear shift lever is in neutral
position.
CHECK
1. Tyre pressure and condition of
tyres.
2. Coolant level.
3. Engine oil level.
4. Brake fluid level.
5. Water in windshield washer
reservoir.
6. Battery electrolyte level.
7. Ensure sufficient Fuel.
ADJUST
1. Adjust your seat position.
2. Check adjustment of all rear view
mirrors.
3. Check and adjust steering angle.
VEHICLE STARTING
1. Vehicle starting function is
controlled by EMS ECU & it
requires “gear in Neutral” and “fully
pressed clutch pedal”. These
interlocks are included to avoid
unintended vehicle movement
during cranking as a safety
measure.
2.
(Revotron engine)
Only in case
of clutch switch failure, vehicle
can be started by pressing “Brake
pedal”. The “Check Engine lamp”
will lit after 3 driving cycles, to
indicate failure of clutch switch.
Contact a
TATA MOTORS
authorised service centre
immediately.
(Quadrajet engine)
The “Check
Engine lamp” will lit after 3 driving
cycles, to indicate failure of clutch
switch.Contact a
TATA MOTORS
authorised service centre
immediately.
