TATA Motors Zest Owner'S Manual Download Page 102

Page: 102 / 166

102

JUMP LEAD STARTING

EMERGENCY & BREAK DOWN ASSISTANCE

Following order should be
followed while connecting battery
leads :

1. Positive (+) of Good battery to

Positive (+) of discharged battery.

2. Negative (-) of Good battery to a

solid metal patch attached to
engine block OR unpainted metal
(Engine) part which is away from
the discharged battery on the
vehicle to be started.

3. Crank and start the engine.

4. While disconnecting follow reverse

order i.e. disconnect Negative (-)
lead followed by Positive (+) lead.

NOTE

Do not connect negative ( - )
terminal if jump start battery (Good
battery) to the negative ( - ) terminal
of discharged battery. This may
lead to an explosion.

Connect leads in the order as shown in figure.

Summary of Contents for Zest







































































































































































Search results

Summary of Contents for Zest

Reviews:

Related manuals for Zest

Brands by name

Popular brands

TATA Motors Zest, Owner'S Manual

Search results

Summary of Contents for Zest

Reviews:

Related manuals for Zest

Brands by name

Popular brands