125
ENGINE OIL LEVEL & BRAKE FLUID LEVEL
MAINTENANCE & SERVICING
08
ENGINE OIL LEVEL :
Warm up the engine to normal operat-
ing temperature.
Turn it off and wait for 5 minutes for
the oil to return to the oil pan. Be sure
the vehicle is on a level surface.
Pull out the dipstick, wipe it clean, and
reinsert if fully.
Pull it out again and examine the oil
level. It should be between ‘MIN’ and
‘MAX’ level. If not, top up with recom-
mended engine oil.
NOTE
The oil consumption depends upon
the driving style and the conditions
under which the vehicle is used.
NOTE
Do not remove the filler cap when
the engine is running.
Do not add oil further than the MAX.
mark. Oil levels above the MAX.
mark may cause engine damage.
For location of Engine oil filling cap &
dip stick, please refer respective
Engine Compartment pages.
BRAKE FLUID LEVEL :
The level of the brake fluid must be
between the min. and max. marks on
the side of the brake fluid container. If
the level falls below the min. mark, add
recommended brake fluid. (Refer
chapter - Fuels, coolants and
lubricants) In case of spongy or hard
pedal or low brake efficiency, please
contact the nearest TATA MOTORS
authorized Service outlet.
WARNING
1. Do not allow brake fluid to make
contact with the skin or eyes.
2. Do not allow brake fluid to splash
or spill on the paint surface as it
will damage the paint. In case of
spillage, wipe it off immediately.
For location of Brake Fluid Container
& filling cap , please refer respective
Engine compartment pages.
