38
INSTRUMENTS & CONTROLS
INSTRUMENT CLUSTER - GAUGES
03
to indicate more severe low fuel
warning.
For checking correct fuel level,
always take following precautions:
1. Always check the fuel level when
the vehicle is on level road.
2. On inclines, curves, braking and
sudden acceleration due to the
movement of fuel in the tank, the
fuel level display may fluctuate or
the low fuel warning lamp may
illuminate earlier than usual.
3. When the ignition switch is in the
‘ON’ position, this gauge gives an
approximate indication of the
amount of fuel in the fuel tank and
it takes few seconds to stabilize
after the ignition is turned ON. ‘F’
stands for full and ‘E’ stands for
empty.
4. Do not continue adding fuel after
the automatic shut ‘OFF’ function
is operated if it is equipped on the
fuel station. The sensor in the fuel
tank may misjudge the amount of
fuel remaining.
5. Running the fuel tank too low or
empty can cause your engine to
stall and could endanger you and
your passengers. You must stop
and obtain additional fuel as soon
as possible after low fuel warning
telltale turns ‘ON’.
6. Low fuel warning symbol will blink
if there is any fault in the system.
Take your vehicle to the nearest
Tata authorized service station if the
symbol starts blinking.
4. Engine Coolant Temperature
Gauge:
(if provided)
Indicates the engine coolant temperature
of the vehicle. If the coolant temperature
reading is very high, the coolant
temperature warning tell tale flashes. In
this case, stop the vehicle, switch OFF
the engine and cool it down for sometime.
Contact nearest
TATA MOTORS
Authorized Service Centre immediately for
rectification.
WARNING
Driving with an Overheated engine can
cause serious damage to the engine
components.
