TATA Motors Zest Owner'S Manual Download Page 157

Page: 157 / 166

157

VALUE ADDED SERVICE

CAR CARE & VALUE ADDED SERVICE

Vehicle Exterior Enrichment :

Why vehicles are painted?

•

For Corrosion protection of the metal surfaces.

•

Ease of application from other corrosion protection treatments.

•

Cheaper than other corrosion protection methods eg.galvanizing, anodizing.

•

For decoration and identification.

Various Environmental Hazards affecting paints :

•

Environmental hazards: destroy your vehicle's finish.

•

Even as your new vehicle rolls off the assembly line, the paint is not protected.

The enemy :

Ultraviolet Rays, Pollution, Tree Sap, Bird Droppings, Car Wash Chemicals, Road Salt, Acid Rain.

Benefits:

Vehicle Exterior Enrichment

•

Removal of medium scratches, orange peel, oxidation , dust nibs etc & swirl marks from painted surface.

•

Restoration of original gloss levels, UV protection after gloss is restored.

•

Cleaning & dressing of tyres, Bumpers & all exterior plastic moldings/trims.

Tata Motors

has tied up with

M/s Autokrom, M/s 3M & M/s Wuerth

for this world class treatment at affordable prices.

This treatment is available in all authorized workshops. The Dealer Service Marketing Executive will explain to you the
benefits and terms and conditions of this treatment.

Summary of Contents for Zest







































































































































































Search results

Summary of Contents for Zest

Reviews:

Related manuals for Zest

Brands by name

Popular brands

TATA Motors Zest, Owner'S Manual

Search results

Summary of Contents for Zest

Reviews:

Related manuals for Zest

Brands by name

Popular brands