TATA Motors Zest Owner'S Manual Download Page 85

Page: 85 / 166

GEAR LEVER & SHIFTING (AMT)

STARTING & DRIVING

AUTOMATED MANUAL TRANSMIS-
SION (AMT) : (If applicable)

The 5-speed Automated Manual
Transmission (AMT) Gearbox offers a
choice of two driving modes:

1. Automated mode

with the gear

lever in position

‘A’

2. Manual mode

with the gear lever

in position

‘M’.

Starting & Driving:

a. To start the engine, the gearshift

lever has to be in position

‘N’

b. Fully depress the brake pedal.

c. Turn the Ignition ‘ON’ and crank the

engine.

d. With the engine running and brake

pedal pressed, depending on your
requirement shift the lever on

R, A

or M

e. Check the position engaged on the

Instrument Cluster display.

f. Release the brake pedal and

accelerate.

NOTE

The engine can only be started when
the gearshift lever is in ‘N’position
with the brake pedal firmly pressed.

NOTE

If ‘F’ is displayed on the Instrument
Cluster display, it means ‘Fault’
condition. Contact a TATA
MOTORS Authorized Service
Centre immediately.

Summary of Contents for Zest







































































































































































Search results

Summary of Contents for Zest

Reviews:

Related manuals for Zest

Brands by name

Popular brands

TATA Motors Zest, Owner'S Manual

Search results

Summary of Contents for Zest

Reviews:

Related manuals for Zest

Brands by name

Popular brands