TASCAM SS-CDR250N / SS-R250N
67
8 – Recording
Incrementing track numbers automatically
Use the menu to select the automatic track incrementation
mode and make specific settings.
When the automatic track incrementation function is on, the
icon appears in the recording function activation status
area on the recording screen.
Automatic track incrementation function settings can be
changed anytime, even after starting recording.
NOTE
If tracks are recorded in WAV format, you can also divide and
combine them after recording using the editing functions.
(See “Dividing tracks (DIVIDE)” on page 71.), (See “Combin-
ing tracks (COMBINE)” on page 72.)
1.
Select the
AUTO TRACK
item on the
REC 5
page to open the
AUTO TRACK
screen. (See “Menu operation procedures” on
2.
Set the automatic track incrementation mode.
Option
Meaning
OFF
(default) Tracks will not be automatically incremented.
LEVEL
The track number will be incremented when
the signal stays below the automatic track
level (
AUTO TRACK
screen
LEVEL
setting) for
at least two seconds, and then the signal
exceeds the level.
DD
When a digital source (CD, DAT, MD) is being
recorded through a digital input, track
numbers will be incremented when track di-
visions on the source are detected. When re-
cording an analog source or a digital source
in any other manner, however,
LEVEL
mode
will be used and tracks will be implemented
in response to the input level.
SIZE
The track number will be incremented when
the file reaches a set size.
TIME
The track number will be incremented at set
time intervals.
3.
The setting items differ depending on the set automatic
track incrementation mode.
LEVEL
mode selected
Select the
LEVEL
item, and set the automatic track incre-
mentation level.
Options:
-72dB
,
-66dB
,
-60dB
,
-54dB
(default),
-48dB
,
-42dB
,
-36dB
,
-30dB
,
-24dB
Select
DELAY
, and set the delay until incrementation after
a signal is detected that exceeds the automatic track incre-
mentation level (10 msec = 0.01 sec).
By setting this to a negative value, recording can be start-
ed before signal detection (using the memory buffer).
Options:
-1000msec
–
0msec
(default, 10msec incre-
ments) –
+1000msec
DD
mode selected
Options:
-1000msec
–
0msec
(default, 10msec increments)
–
+1000msec
SIZE
mode selected
Options:
640MByte
,
1GByte
,
2GByte
(default)
TIME
mode selected
Options:
1min
–
5min
(default) –
10min
,
15min
,
30min
,
1hour
,
2hour
,
6hour
,
8hour
,
12hour
,
24hour
