Tascam SS-CDR250N, Owner'S Manual

Page: 39 / 112

TASCAM SS-CDR250N / SS-R250N
39
4 – Playback
Setting playback start timing
You can set the timing that playback starts when this unit is in
playback standby and a fader on an external controller is raised
from its lowest position (−∞).
1.
Select
FADER DELAY
on the
PLAY 3
page to open the
FADER
START DELAY screen. (See “Menu operation procedures” on
page 22.)
2.
Set the playback start timing.
Range:
OFF
(default),
100msec
,
200msec
,
300msec
3.
Confirm the setting and return to the Menu Screen.
Setting the sampling rate of output
audio
You can output audio using a set sampling rate regardless of the
sampling rates of the files.
1.
Select the OUTPUT RATE item on the PLAY 3 page to open
the
OUTPUT RATE
screen. (See “Menu operation procedures”
on page 22.)
2.
Set the sampling rate used for output audio.
Option Meaning
AUTO
(default) Use file sampling rates.
44.1kHz
Convert to 44.1 kHz and output.
48kHz
Convert to 48 kHz and output.
96kHz
Convert to 96 kHz and output.
EXTERNAL
Use sampling rate synchronized to input
source clock.
When an analog input is selected, this set-
ting functions as
AUTO
.
NOTE
When set to
EXTERNAL
, if synchronization with the external
clock is not possible, file sampling rates will be used.
3.
Confirm the setting and return to the Menu Screen.
NOTE
Audio output from an IF-DA2 (Dante) card will use the card's
operating sampling rate regardless of this setting.
Using the call function
The call function returns to the call point (last point playback
started from playback standby) and resumes playback standby.
When in playback standby, press the PAUSE [CALL] button to
return to the last point playback started from a paused state and
resume playback standby.
The following actions will clear the call point.
0
Turning the unit off
0
Ejecting the current media
0
Changing the playback area
0
Changing the playback mode
0
Changing the contents of the current media (by recording,
editing, deleting, etc.)
NOTE
i
If the call point is not set, pressing the PAUSE [CALL] button
will cause a “
No Call Point
” pop-up warning message to
appear.
i
You cannot use the call function when the playback mode is
set to
PROGRAM
or
RANDOM
.
Setting the call function
When in playback standby, press the PAUSE [CALL] button to
search for the call point and resume playback standby.
1.
Select
CALL
on the
PLAY 3
page to open the
CALL FUNCTION
screen. (See “Menu operation procedures” on page 22.)
2.
Turn the call function on or off.
Options
DISABLE
: Do not use call function
ENABLE
(default): Use call function
NOTE
If the
CALL FUNCTION
screen setting is
DISABLE
, the unit will
not search for call points.
3.
Confirm the setting and return to the Menu Screen.