Tascam SS-CDR250N Owner'S Manual Download Page 105

Page: 105 / 112

TASCAM SS-CDR250N / SS-R250N

105

16 – Messages

Message

Meaning

Note

Save Failed.

Saving the file failed.

SD Card Locked

The SD card is locked.

SD Card Locked
Cannot Record/Edit

Since the SD card is locked, recording and editing are not
possible.

This name already exists.

A folder or file with the same name already exists.

There is no entry.

Playback is not possible because the playlist has no entries.
Select a playlist that has entries or assign entries to this one.

There is no track

Playback is not possible because there are no files.

Timer Event nn (Download)
Failed

The download timer event numbered

failed.

= timer event number

Unsupported File too many
tracks

You tried to play a file with more tracks than are supported.
Or, you tried to add too many to a playlist.

Unsupported Fs.

You tried to play a file with a sampling frequency that is not
supported. Or, you tried to add one to a playlist.

unsupported type

The media is not a supported type (not DMA compatible), so
it cannot be used.

Summary of Contents for SS-CDR250N

















































































































Search results

Summary of Contents for SS-CDR250N

Reviews:

Related manuals for SS-CDR250N

Brands by name

Popular brands

Tascam SS-CDR250N, Owner'S Manual

Search results

Summary of Contents for SS-CDR250N

Reviews:

Related manuals for SS-CDR250N

Brands by name

Popular brands