106
TASCAM SS-CDR250N / SS-R250N
17 – Troubleshooting
If you are having trouble with the operation of this unit, please try the following before seeking repair.
If these measures do not solve the problem, please contact the store where you purchased this unit or TASCAM customer support ser-
vice.
The unit will not turn on.
0
Confirm that the power plug and other connectors are insert-
ed completely.
The medium is not recognized.
0
Confirm that the SD card or USB flash drive is loaded com-
pletely.
0
Stop playback or recording once.
The unit does not function.
0
Confirm that the lock function is not on.
Playback is not possible.
0
If you are trying to play a WAV file, confirm that it uses a sam-
pling frequency (44.1/48/96kHz) and a bit depth (16/24-bit)
that are supported by this unit.
If you are trying to play an MP3 file, confirm that the bit rate is
supported by this unit.
No sound is output.
0
Check connections with the monitoring system again. Check
the volume of the amplifier as well.
Recording is not possible.
0
If you are using an external device, check the connection
again.
0
Adjust the recording levels.
0
If there is not enough room on the medium, delete unnec-
essary data to increase the amount of open space or change
the medium.
0
If the total number of files, folders and other items inside the
recording folder is great, change the recording folder.
Changed settings are forgotten.
0
This unit backs up the settings every time they are changed.
Backup can fail depending on when the power is turned off.
Do not turn the power off immediately after changing a set-
ting.
There is noise.
0
Confirm that the connection cables do not have contact is-
sues.
“Name Full” appears when editing a name.
0
Due to system limitations, 255 is the maximum number of
characters (half-width) that can be used in file and folder
names as well as in other text fields. Moreover, the full path
on the
BROWSE
screen is limited to 255 characters. This limit
includes all the folder, subfolders and file names along with
the ¥ symbols that divide them.
The RC-10 remote control does not function.
0
Confirm that a battery is installed and has not died.
