78
TASCAM SS-CDR250N / SS-R250N
10 – CD functions (SS-CDR250N only)
Copying files from CDs to USB flash
drives and SD cards with or without
conversion
You can copy files on CDs to USB flash drives and SD cards with
or without conversion. When copying from an audio CD, you can
also convert each track to a designated file format (MP3 or WAV).
When copying from a CD-R/CD-RW disc that contains MP3 or
WAV files, the files can be copied in their current format.
NOTE
You cannot copy to a write-protected SD card. (See “SD card
write protection” on page 11.)
Converting and copying audio CD tracks
This explains how to convert audio CD format tracks on a CD to
MP3 or WAV format files and write them to the selected medium
(USB flash drive/SD card).
In the following procedures, we assume that
CD
is selected as
the current medium and that the CD that contains the files to be
copied and the medium to which they are to be copied are load-
ed in the unit.
NOTE
Press the MENU button or select the
PREVIOUS STEP
item in
the pull-up menu to return to the previous step.
1.
Select the
RIP TO MEMORY
item on the
CD
page. (See “Menu
operation procedures” on page 22.)
2.
Press the MULTI JOG dial to open a pop-up with destination
media options for file conversion and copying.
3.
Turn the MULTI JOG dial to select the copy destination me-
dium.
4.
Press the MULTI JOG dial to open a pop-up with format op-
tions for writing the CD-R/CD-RW disc.
NOTE
An error message will appear if the selected medium is not
loaded.
5.
Turn the MULTI JOG dial to select the file formats to use on
the selected medium.
FILE
Set the file format.
Options:
MP3
,
WAV
,
BWF
BITRATE
Set the MP3 format bit rate.
Options:
64kbps
,
128kbps
,
192kbps
,
256kbps
,
320kbps
NOTE
The sampling frequency used to record files to the selected
medium is fixed at 44.1 kHz.
6.
After completing all settings, press the MULTI JOG dial to
open the
SELECT RIP SOURCE
screen.
7.
Select the tracks to copy.
Select the source file, and press the MULTI JOG dial to open
the pop-up file menu.
8.
Select the
SELECT/UNSELECT
item in the file menu, and
press the MULTI JOG dial.
A check (
4
) is added to selected files.
Repeat this operation to select multiple files.
To deselect the selected file, press the MULTI JOG dial again
to open the pop-up file menu.
Then, select the
SELECT/UNSELECT
item, and press the
MULTI JOG dial.
NOTE
i
If the total size of the files to be copied exceeds the remain-
ing capacity of the selected medium or if the number of
tracks or folders exceed system limits, a corresponding “
No
Free Space
”, “
Track limit reached.
” or “
Folder limit
reached.
” pop-up message will appear.
i
If this occurs, press the MENU [JOG] button to close the pop-
up message, and reduce the total copy source size or number
before selecting the
NEXT STEP
item.
9.
After selecting all the files to copy, press the MULTI JOG dial
to open the pop-up file menu.
10.
Select the
NEXT STEP
item in the file menu, and press the
MULTI JOG dial.
11.
The
RIP TARGET SELECT
screen where you can select the
write destination (target) opens
