What’s new in version F8?
Multiway
This feature will extend point to point calls to conferences on MCUs
hosted in the network. The new participant will be consulted before he is
added to the conference. The feature is supported on H.323 and SIP.
SIP ICE
Standards based NAT traversal for the SIP protocol.
MNS support
The NAT traversal functionality is extended with MNS (“Media Network
Services”) mode. This mode prioritizes use of TURN, so that all media
traffic is relayed, unless sent to an endpoint on the local network. This
mode is intended for use with dedicated media transport networks (see
e.g. http://www.medianetworkservices.com).
Security improvements.
•
Removed known vulnerabilities with regards to cross-site scripting
•
Security log
•
Password restriction
Call features
•
H.323 Call Transfer
•
Direct DNS dialling. The ability to launch a call via DNS lookup for
calls that are dialed to a true A-record, not a full URI.
•
Call last number with double press on Connect button.
Improved usability
•
Move keypad icon in DTMF mode. In the Icons menu you can
configure the keypad icon to be displayed on the right or left side of
the screen.
•
Number key mode, added an “always use this” option
•
Configurable Aspect ratio on local display
•
Calls received when “Do not disturb” is active will be put in Missed
Calls list (earlier they were put in Received Calls)
•
Russian search in Phonebook
•
Mic on/off indication for SIP calls
•
New layout for 3-party calls on dual monitor systems. The two called
parties on a Mulitisite host can be displayed on separate screens.
This is default enabled for T7000/T8000 systems. For other dual
screen systems it can be enabled from the menu.
•
Wide CP layout
•
Reverse Camera steering. Configuration to decide what direction the
camera will move when you press the arrow keys.
OCS Integration
TANDBERG MXP systems can be natively integrated into an OCS
2007 R2 environment. When a TANDBERG MXP system has been
registered and authenticated with the OCS R2, the MXP endpoint will
appear as a contact with presence information in the Microsoft Office
Communicator contact list.
The TANDBERG MXP also supports the OCS’ MPOP mechanism,
which means that a user can register his endpoint on his/her OCS
R2 account. All incoming calls to this user will be forked to both the
Communicator client as well as to the TANDBERG MXP system.
Miscellaneous
•
Support WXGA as PC input
•
Added ALD support (hearing impaired feature)
•
Enhance Picture control menu. Added white balance to the picture
control menu.
Software release note
The software release note is found at the TANDBERG web site.
Go to:
http://www.tandberg.com/support/documentation.
php?p=Upgrades_and_Diagnostics
D14033.06—AUGUST 2010
8
MXP
Administrator Guide
Contents
Introduction
Getting started
The menu structure
The settings library
Using the system
Physical interfaces
Peripheral equipment
Contact us
Appendices
Introduction
