CONNECTORS
PRECISION HD CAMERA
: The 6 pin RJ connector is
used when cascading cameras, Extra Camera signal
and external camera detection.
WAVE II CAMERA
: The 6 pin RJ connector is used
when cascading cameras, Control (out) signal and
external camera detection.
NOTE
: It does not provide power for cascaded
camera.
CABLE LENGTH
The maximum length of the camera cable for multiple
cameras supported by TANDBERG is 20 m (65 ft).
IMPORTANT!
When using the
PRECISION HD CAMERA
, please note
that the enclosed TANDBERG Camera Cables must
be used!
Do not use other camera cables as this might cause
problems with the transfer of video signals from the
Precision HD Camera.
EXTRA FIXED CAMERAS
You can connect extra fixed cameras to your system,
for example, a whiteboard camera. Connect the video
output of the additional camera to one of the available
Video inputs on the system.
NOTE!
Additional controllable cameras are only
available for some roll-about systems.
Set-tops and personal systems may be able to connect
additional cameras.
MULTIPLE CONTROLLABLE CAMERAS
Attaching multiple cameras to one system expands
visibility and is useful in large group applications.
You can connect both Precision HD Cameras and
WAVE II cameras to the system. Camera number one
must be connected to video input 1 or to the HD input
(data 2). Camera two must be connected to video input
2. Camera number three must be connected to video
input 3, and so forth.
The system is able to control a total of 4 cameras.
Either 1 Precision HD Cameras plus up to 3 WAVE II
Cameras, or up to 4 WAVE II -cameras.
Optional the Precision HD Cameras and the WAVE II
cameras are supplied with the necessary cabling. In
addition, an external power supply for the camera is
included.
TANDBERG VIDEO SWITCH
Rack-mountable hardware option for TANDBERG 6000
MXP and 3000 MXP codecs that delivers the ability to
daisy chain multiple HD cameras and provides support
for third party HD cameras. Supports up to six HD
camera inputs. Allows the DVI input on the codec to be
reserved for PC presentations. Read more on
http://
www.tandberg.com/products/peripherals.jsp
Daisy Chain with PrecisionHD and WAVEII Cameras
Daisy Chain with WAVEII Cameras
Multiple cameras
D14033.06—AUGUST 2010
303
MXP
Administrator Guide
Contents
Introduction
Getting started
The menu structure
The settings library
Using the system
Physical interfaces
Peripheral equipment
Contact us
Appendices
Peripheral equipment
