System upgrade using FTP
The TANDBERG MXP systems can be software upgraded in three
different ways:
•
Using Web Interface
•
Using FTP
•
Using ISDN
Software File
Before starting the software upgrade of the TANDBERG MXP system,
please make sure to have the new Software File, (for instance
s050000F30.pkg).
Your TANDBERG Partner will provide this for you.
Release Key
Before starting the software upgrade of the TANDBERG MXP system,
please make sure to have the Release Key for this software available.
Your TANDBERG Partner will provide this for you.
Backup
All options and settings will automatically be stored when upgrading, so
no backup is necessary.
What happens If the upgrade is interrupted
If the system upgrade process is aborted before it’s complete, the
system will work as normal with the original software.
The system upgrade procedure
To upgrade using the web interface, please do the following steps
1.
Copy the new software file to a folder on your harddisk, for instance
c:\software
.
2.
Open a DOS window, and go to the folder where the new software
is stored.
3.
Type ftp
<ip address of the TANDBERG MXP system>
for
example ‘
ftp 10.0.8.77
’
4.
Type in the supplied ‘
Release Key
’ as provided from your
TANDBERG Partner.
5.
Type in your IP password (default is “
TANDBERG
”) as password.
6.
Type ‘
put <software file name>
‘ and press Enter. The new
software file will now be uploaded to the TANDBERG MXP system.
Example: ‘
put s050000F30.pkg
’
7.
When the software upload is complete, end the ftp connection to
the TANDBERG MXP system by typing ‘
bye
’ in the DOS prompt.
8.
To exit the DOS window completely, type ‘
exit
’
9.
Restart the video system to activate the new software.
D14033.06—AUGUST 2010
319
MXP
Administrator Guide
Contents
Introduction
Getting started
The menu structure
The settings library
Using the system
Physical interfaces
Peripheral equipment
Contact us
Appendices
Appendices
