MENU ADDRESS
SETTINGS DESCRIPTION
INFORMATION
PRODUCT
Control Panel >
Network >
ISDN, External, Leased E1/T1 >
LEASED E1/T1 SETTINGS
T1 LINE CODING
B8ZS:
Indicates how the signals on the line should be coded.
B8ZS-RESTRICTED:
If parts of the line between the systems use restricted coding, this should be selected.
B8ZS - Binary 8 Zeros Substitution
NOTE!
All settings must be identical on both sides of the
Leased E1/T1 connection.
Systems
with leased
line
Control Panel >
Network >
ISDN, External, Leased E1/T1 >
Leased E1/T1 Settings
LINE SETTINGS
T1 CABLE LENGTH 1
Configures the ISDN-PRI Line Settings.
Specify the distance (0-133 ft) of the CSU connected to the E1/T1 Port 1 on Codec 1.
CSU = Channel Services Unit
Systems
with leased
line
Control Panel >
Network >
ISDN, External, Leased E1/T1 >
Leased E1/T1 Settings
LINE SETTINGS
E1 CRC-4
E1 CRC-4 is used for most E1-PRI configurations.
ON:
Select On if E1 CRC-4 is supported by your E1 network equipment.
OFF:
Select Off if E1 CRC-4 is not supported by your E1 network equipment.
CRC - Cyclic Redundancy Check
Systems
with leased
line
D14033.06—AUGUST 2010
207
MXP
Administrator Guide
Contents
Introduction
Getting started
The menu structure
The settings library
Using the system
Physical interfaces
Peripheral equipment
Contact us
Appendices
The settings library
