EXTRA
CAMERA
12V DC IN
POWER
HD
VIDEO OUT
HDMI
HD
VIDEO OUT
CODEC
KENSINGTON
LOCK
The TANDBERG Precision HD Camera is
available to:
•
TANDBERG 8000
MXP
•
TANDBERG 6000
MXP
Profile
•
TANDBERG 3000
MXP
Profile*
•
TANDBERG Maestro
MXP
•
TANDBERG Edge 75/85/95
MXP
TANDBERG PRECISION HD CAMERA - WITH PINOUT AND
CONNECTORS
USE THE ENCLOSED CAMERA CABLES
Please note that the enclosed TANDBERG
Camera Cables must be used!
Do not use other camera cables as this might
cause problems with the transfer of video signals
from the Precision HD Camera.
HD Video Out Codec
Pin-Out on 8 pin RJ
(shielded modular jack)
Signal Name
Pin Number
+12V (presence 2.8mA
current source when
connected in daisy
chain)
8
GND
7
TXD (out)
6
Video LVDS -
5
Video LVDS +
4
RXD (in)
3
GND
2
+12 V
1
Extra Camera
Pin-Out on 6 pin RJ
(modular jack)
Signal Name
Pin Number
GND
6
GND
5
RXD (in)
4
TXD (out)
3
Presence
(12 V in daisy chain)
2
GND
1
This connector is used for the power, video
and control signals to the main camera.
This connector is used when cascading
cameras: Control (out) signal and external
camera detection.
NOTE
: It does not provide
power for cascaded camera.
MULTIPLE CAMERA SUPPORT
The system is able to control a total of 4
cameras. See the Multiple Cameras section
overleaf.
HD VIDEO OUT, HDMI, CONNECTOR
The HD Video Out, HDMI, connector is
disabled when connected to a TANDBERG
system using the TANDBERG Camera
Cable. This output does not support
HDCP (High Bandwidth Digital Content
Protection).
* Applies to T3000 MXP Profile with new hardware.
TANDBERG PrecisionHD camera
D14033.06—AUGUST 2010
301
MXP
Administrator Guide
Contents
Introduction
Getting started
The menu structure
The settings library
Using the system
Physical interfaces
Peripheral equipment
Contact us
Appendices
Peripheral equipment
