MENU ADDRESS
SETTINGS DESCRIPTION
INFORMATION
PRODUCT
Control Panel >
Audio >
ALERT TONES & VOLUME
KEY TONES
The unit can produce a sound every time a remote control key is pressed.
ON:
There will be a sound indicator when pressing keys on the remote control
OFF:
The remote control Key Tones is switched off.
All MXP
systems
Control Panel >
Audio >
GRAPHICAL VIEW
GRAPHICAL VIEW
The graphical view is a visual presentation of the connection between the audio inputs and outputs.
You can play a test tone that will appear at the outputs selected. To play a test tone, navigate to any of the
Inputs or Outputs and click OK. The green dots indicates connection and when you play the test tone the
“marching ants” will show you the signal flow.
The Graphical View menu is only available on video systems
with audio inputs and audio outputs.
Not: T1000,
Compass
and Utility
Control Panel >
Audio >
GRAPHICAL VIEW
TEST TONE
Select a tone from the list. You may use any of the alert signals as Test Tone signal.
The Graphical View menu is only available on video systems
with audio inputs and audio outputs.
Not: T1000,
Compass
and Utility
Control Panel >
Video >
CAMERA TRACKING MODE
The Camera Tracking Mode controls how fast the camera should zoom in on a single person speaking.
SLOW:
The system waits a while before zooming in on a single person speaking. Suitable when wide-angle
images are preferred over close-up images.
NORMAL:
Should be used in regular meetings.
FAST:
The system quickly zooms in on a single person speaking. Suitable when close-ups are preferred over
wide-angle images.
This menu entry is available only if using the TANDBERG
PrecisionHD Camera or the WAVE II Camera.
MXP
systems
with
Precision
HD camera
or WAVE II
camera
(not 550
nor 1000)
Control Panel >
Video >
MCU STATUS LINE
The MultiSite, MCU and DuoVideo status info can be displayed whenever applicable, not displayed at all, or
displayed for a short time. The information is displayed on the MCU Status Line, which appear on top of the
screen and provides information about the conference.
AUTO:
The MultiSite, MCU and DuoVideo status info will be displayed for a few seconds and then timed out.
When the remote control is moved, the indicators will be shown again.
ON:
The MultiSite, MCU and DuoVideo status info will be displayed on the MCU status line to provide
information about the conference.
OFF:
The MultiSite, MCU and DuoVideo status info will not be displayed.
MCU is short for Multipoint Conference Unit, a device used to
connect multiple audio and video sites in one or more IP, ISDN
and mixed IP & ISDN video meetings.
All MXP
systems
D14033.06—AUGUST 2010
198
MXP
Administrator Guide
Contents
Introduction
Getting started
The menu structure
The settings library
Using the system
Physical interfaces
Peripheral equipment
Contact us
Appendices
The settings library
