TANDBERG MXP F8 -, Administrator'S Manual

Page: 233 / 375

Setting the administrator password
•
Use the ARROW keys of the remote control
to navigate to the CONTROL PANEL icon and
press OK
•
Navigate to the SECURITY icon and press OK
•
Navigate to the ADMINISTRATOR
PASSWORD and key in a password (pin code)
•
Navigate to the SAVE icon and press Ok to
leave menu, putting changes into effect
Password Protection of the Control Panel Settings
About administrator password
All settings of the Control Panel may be password
protected by entering a pin code consisting of up
to five digits in the
ADMINISTRATOR PASSWORD
field.
Whenever you click the
SETTINGS icon in the
Control Panel, you will prompted to key in this pin
code in order to gain access to the Control Panel
Settings.
Gain Access to a Password Protected Control Panel Menu Clear the administrator password
Log in the same way as when gaining access to a
password protected Control Panel Settings menu.
•
Navigate to the SECURITY SETTINGS menu,
in the same way as setting the Administrator
Password.
•
In the ADMINISTRATOR PASSWORD parameter
field, use the CANCEL key to clear the password
and navigate down to the SAVE icon to leave
menu putting changes into e
•
Use the ARROW keys of the remote control
to navigate to the CONTROL PANEL icon and
press OK
•
In the CONTROL PANEL navigate to the
ADMINISTRATOR SETTINGS and press OK
•
You will now be prompted for a menu password
•
Key in the Administrator Password and press
OK .
•
If the wrong pin code is entered, the message:
Attention
Wrong menu password
- will appear on the screen.
D14033.06—AUGUST 2010
233
MXP
Administrator Guide
Contents Introduction Getting started The menu structure The settings library Using the system Physical interfaces Peripheral equipment Contact us Appendices
Using the system