About Sub-address
A Sub-address is used to differentiate between systems on the same
ISDN line and is primarily used in European Countries.
How to Specify a Sub-address
To specify an ISDN sub-address or its LAN equivalent extension
address (TCS-4), add a star (*) after the number and then enter the sub-
address/extension address.
Examples:
12345678*10
12345678*abcd
Syntax:
<number>*<Sub-address/extension address/MCU
password>
NOTE:
When dialing IP via a gateway, the number behind the star (*) on
IP might be interpreted as an extension address.
About Extension Address
When dialing via a gateway, a LAN equivalent extension address (or
TCS-4) is used to differentiate between systems on the LAN.
About MCU Password
When calling an external MCU (Multipoint Conference Unit) which
requires a password (TSC-1), the password can be added after the star
(*). If no password is specified at the time of dialing, the user will be
asked to enter the password after connecting to the MCU.
D14033.06—AUGUST 2010
251
MXP
Administrator Guide
Contents
Introduction
Getting started
The menu structure
The settings library
Using the system
Physical interfaces
Peripheral equipment
Contact us
Appendices
Using the system
