MENU ADDRESS
SETTINGS DESCRIPTION
INFORMATION
PRODUCT
Control Panel >
Audio >
AUDIO OUTPUTS
AUDIO OUT 1-3
Applies to: 8000
MXP
, 6000
MXP
Profile, Maestro
MXP
OUT1:
is intended for connection to TANDBERG Digital Natural Audio Module, televisions or audio amplifiers.
OUT2 (AUX):
is intended for connection to audio recording equipment or to a telephone add-on hybrid. The
signal is a mix of audio from both the far end and local end (not from Audio in 5).
If an output is Off, no audio will be sent to that output.
Do not connect Out2 (AUX) to a loudspeaker placed in the same room as the microphones connected to
the system. This will cause “howling” and possible damage to the speaker system.
OUT3 (VCR):
is intended for connection to a VCR or other recording equipment. The signal is a mix of audio
from far end and local end (not from Audio in 6). If an output is Off, no audio will be sent to that output.
Do not connect Out3 (VCR) to a loudspeaker placed in the same room as the microphones connected to
the system. This will cause “howling” and possible damage to the speaker system.
NOTE!
The Audio Out 2 or Audio Out 3 should never be
connected to a loudspeaker placed in the same room as
the microphones connected to the system. This will cause
“howling” and possible damage to the speaker system.
The different system can have different numbers of Audio
Inputs. See
Interfaces
in the
Peripheral Equipment
section for
more information on this topic for your product.
When no audio module is detected, audio outputs can be:
•
Out 2 for VCR Left
•
Out 3 for VCR Right.
8000
6000
Maestro
Control Panel >
Audio >
AUDIO OUTPUTS
AUDIO OUT 1-2*
Applies to: 3000
MXP
Profile, Tactical
MXP
, 990/880/770
MXP
, 550
MXP
, Edge 95/85/75
MXP
OUT1:
is intended for connection to televisions or audio amplifiers.
OUT2 (AUX):
is intended for connection to a VCR or other recording equipment. The signal is a mix of audio
from far end and local end (except VCR in).
NOTE!
The Audio Out 2 should never be connected to a
loudspeaker placed in the same room as the microphones
connected to the system. This will cause “howling” and
possible damage to the speaker system. If an Output is set to
Off, no audio will be sent to that output.
When no audio module is detected, audio outputs can be:
•
Out 1 for VCR Left
•
Out 2 for VCR Right.
* TANDBERG 550 MXP has one Audio Output (see Out1)
3000
Tactical
990/880/
770
550
95/85/75
D14033.06—AUGUST 2010
192
MXP
Administrator Guide
Contents
Introduction
Getting started
The menu structure
The settings library
Using the system
Physical interfaces
Peripheral equipment
Contact us
Appendices
The settings library
