Primary used in Europe, Middle East and Asia
PARALLEL DIAL
: Channels will be dialed and connected in parallel
when setting up a bonding call.
PC PRESENTERTF
: An easily accessible PC connection plug. When
connected the PC image is displayed on the monitor.
PC SOFTPRESENTERTF
: Shows PC images via the LAN connection.
PIP
: Picture-In-Picture
POINT-TO-POINT CALL
: A call with two participants including your self
POP
: Picture Outside Picture. POP is a picture layout mode that is
optimized for wide screens: Full screen, 1+3 layout and emulated dual
monitor layout.
PRECISION HD CAMERA
: High Definition camera – delivers high
resolution quality video
PRESENTATION
: Use the Presentation key to show another video
source from a predefined presentation source. Select Presentation from
the menu to choose among all available video sources.
PRESENTATION SOURCE
: The video source that is on display when
you press the Presentation Key on the remote control
PRESETS
: Predefined camera positions (and video sources)
Q
QCIF
: Quarter CIF, 176x144 pixels
QSIF
: Quarter SIF, 176x120 pixels
R
RELEASE FLOOR
: To end the request floor function.
RELEASE FLOOR TO SITE
: Allows the chairman to release the floor.
REMOTE
: Short for Remote Control
REQUEST FLOOR
: The MCU will broadcast the video in full screen to
all other participants in the conference. If the MCU conference has a
chairman, a request will be sent to the chairman.
RESTART
: Restarts the system.
RESTORE DEFAULTS
: Restores system settings to the factory defaults.
RESTRICTED CALL
: A call to a 56 kbps network. By default the
system will dial an unrestricted call (a call to a 64 kbps network) and
downspeed to 56 kbps if necessary.
S
S-VHS
: S-video
S-VIDEO
: The standard camera uses one of the S-video inputs in the
codec.
SELFVIEW
: Outgoing video. In most cases, the image of your self.
SERIAL NUMBER
: A unique number (the hardware serial number, listed
in the System Information menu) to identify your system towards your
TANDBERG representatives.
SIDE-BY-SIDE
: Side-by-side view means that two pictures are displayed
side by side each other on the screen. You will se two equally sized
pictures.
SIF
: Standard Input Format, 352x240 pixels
SNMP
: Simple Network Management Protocol.
SNMP COMMUNITY
: SNMP Community names are used to
authenticate SNMP requests. SNMP requests must have a password
in order to receive a response from the SNMP agent in the system. The
SNMP Community name is case sensitive.
SNMP TRAP HOST
: Identifies the IP-address of the SNMP manager.
SNMP TRAPS
: Generated by the agent to inform the manager about
important events.
SOFTMUX
: Ensures high reliability and includes the unique
Downspeeding feature. It also makes it possible to dial to another video
communication equipment, phones and mobile phones in a uniform
way, and provides an on-screen, real-time feedback on the progress of
a call.
SPLIT SCREEN
: All the participants in a MultiSite conference are
displayed on the screen. (Former Continuous Presence)
START CHANNEL
: Indicates the firstE1/T1 channel the system is
allowed to use. The setting might be used when if the E1/T1 line is
shared with other equipment.
START UP VIDEO SOURCE
: The video source that is on display when
the system wakes up from standby mode.
STATUS FORMAT
: Provides call quality feedback on the status line.
STREAMING
: Allows broadcasting of audio/video via an IP network.
STREAMING ADDRESS
: Defined as the IP-address of a streaming
client, streaming server or a multicast address.
STREAMING ADDRESS PORT
: If several codecs are streaming to the
same IP-address, different ports have to be used in order for the client
to know which stream to receive.
STREAMING ALLOW REMOTE START
: Streaming can be started from
the Video communication system using the remote control, by using
the Data port, or from external user interfaces like the Web-browser or
Telnet session.
STREAMING ANNOUNCEMENTS
: The system will announce to the
network that it is streaming. This enables a streaming client (e.g. a PC)
to connect to the system’s streaming session. Used by Cisco IP/TV.
STREAMING PASSWORD
: Prevents unauthorized access to the
streaming functionality.
STREAMING SOURCE
: Select between local video and/or far end video
to be streamed. Local and far end audio is always streamed.
STREAMING TTL/ROUTER HOPS
: Used for streaming data to limit how
many routers the data should pass before it is rejected.
STREAMING VIDEO RATE
: Defines the Video streaming rate from the
system.
SVGA
: Super VGA. (800x600)
SXGA
: Super extended Graphics Array (1280x1024)
SYSTEM
INFORMATION
: Lists system numbers, line status, software
version and other useful information.
SYSTEM NAME
: Identifies a video communication system
T
T1
: Network type, 24 channels. Default for NTSC versions.
T1 LINE CODING
: Indicates how the signals on the line should be
coded. If parts of the systems use restricted coding, this should be
selected.
TAKE CHAIR
: Request chairmanship of the conference. If no one else is
chairman, the request is granted.
TCS-4
: Used to address different systems on a LAN when dialing in via
a gateway.
TERMINAL NAMES
: Lists the site numbers or name (if supported) of
other sites connected in the conference.
TERMINATE MEETING
: The chairman can terminate the conference, i.e.
all participants are disconnected.
TMS
: TANDBERG Management Suite
TOUCH TONES
: To dial extension numbers etc. during a call, use touch
tones in order to get tones instead of preset on the number keys.
TRACKER
: The tracker is a small infrared remote control device made to
steer the camera to any desired location within the room.
TSC-1
: TCS-1 is used for H243 password on H320 MCU’s
V
VCR
: Video Cassette Recorder
VGA
: Video Graphics Array. (640 x 480)
VGA OUT QUALITY
: Changes the resolution of the VGA signal available
in the VGA Out connector at the rear of the codec.
VIEW SETTINGS
: Displays all the system settings in a read only format.
VIEW SITE
: View any participant in the conference other than the
participant currently On Air. Can be used by all conference participants.
VNC
: Virtual Network Computing.
Glossary,
continued...
D14033.06—AUGUST 2010
373
MXP
Administrator Guide
Contents
Introduction
Getting started
The menu structure
The settings library
Using the system
Physical interfaces
Peripheral equipment
Contact us
Appendices
Appendices
