Tadano TT-800XXL1, Service Manual

Page: 148 / 267

H-3 H-3
Outrigger Extension Length Detector
10
W305-0350E
5. Remove bolt and separate drum assembly and
base plate.
Drum assembly
Base plate
Bolt
IW305‑0250E06
6. Remove the wire from the drum assembly.
3. Reassembly
1 . Put a zero marker on a new wire by winding a
yellow tape on it. Then tie an auxiliary string of
about
1 .0 m (3.3 ft) in length to the terminal of the
wire.
Drum side
IW305-025 1 E 1 0
L3
L4
Zero marker (yellow tape)
Aux. string
Approx.
1 m (3.3ft)
L3 : 3.24 m ( 1 0.63ft)
L4 : 0.08m (0.26ft)
2. Wind the wire round drum assembly until the
yellow tape position. Then wind it three additional
turns an secure the wire with a packing tape to
prevent it from getting loose.
[NOTICE]
The wire winding direction should be clockwise as
viewed from the shaft end.
Gummed tape
Gear side
IW305-025 1 E 11
3. Mount base plate on drum assembly with bolt.
Drum assembly
Base plate
Bolt
IW305‑0250E06