Tadano TT-800XXL1, Service Manual

Page: 135 / 267

26
W 1 83-0 1 3 1 E
G-6. G-6.
Hose Reel
2) With the lower side coated with grease,
place spring in case clamped in a vise, and
install the protection plates.
3) Fasten spring and pin with special bolt
coated with screw locking compound.
4) Remove the vise pliers on the outer end side
of spring and attach auxiliary spring.
5) Fasten the spring to spring case with special
bolt coated with screw locking compound.
6) After installation, apply water repllant
compound to nut.
7) Remove the remaining vice pliers.
3. Temporarily install drum plate, to spring case,
install support to pin, and fasten with set screws.
4. Remove the protection plates, install seat packing,
coated with adhesive on both sides, aligning with
the bolt holes to spring case.
5. Install drum plates to the spring case with nuts.
6. Apply water replellant compound to the mating
surfaces of drum plates.
△
0
366-7 1 6-50000