Tadano TT-800XXL1, Service Manual

Page: 226 / 267

ii
1 2. Counterweight stowing position detection
switch• 1 (CS24) and switch•2 (CS25)
...................................................... 9
1 3. Front jack full retraction detection switch
(S087) ......................................... 1 0
■
Check (Crane Operation)
1 . Hoisting.................................................... 11
2. Jib ..................................................... 11
3. Detection of contact of the
front jack with ground ................... 11
4. Setup the outrigger emergency................ 11
5. Upper outrigger operation (option): It
becomes possible when connecting
PTO and becoming the crane work
possible. .......................................
11
6. Alarms .................................................... 1 2
7. Adjustment procedure of front jack overload
detector switch (S660)................. 1 3
■
Adjustment and Checks
1 . Engine speed adjustment procedure....... 1 4
1 . 1 Speed control ........................................... 1 4
1 .2 Accelerator pedal ..................................... 1 6
1 .3 Engine speed ........................................... 1 6
2. Adjusting boom telescoping wire ropes... 1 7
■
Oils and Grease Table ............................... 2 1
■
Mass Table ................................................ 22
■
Boom Connecting Pin and Thread Size Table
.................................................... 23