Tadano TM-2000-1, Service Manual

Page: 129 / 194

AMA (Load Moment Indicator)
H - 1 H - 1
12
W301-0320E
5) Pulling out the cord along the rollers at the boom
end
If the terminals are not detached from the cord
end, the cord cannot be pulled out through the
rollers C and D.
Then, the following steps will be needed.
If the cord is cut halfway and the portion of the
cord with the terminals can be pulled out from the
side of the boom front end, the following steps 1,
2 and 3 are not necessary.
1. Remove the split pin from the pin for the roller.
2. Pull out the pin.
3. Remove the roller.
4. Pull out the cord.