Tadano TM-2000-1, Service Manual

Page: 133 / 194

16
W301-0320E
AMA (Load Moment Indicator)
H - 1 . H - 1 .
6) Securing the cord on the boom front end
1. Pull out the wire from the support at the top
surface of the top boom section. Once the cord
is pulled into the boom for about 400 mm (1.3ft)
from the grommet, temporarily fix the cord to the
support.
2. Fix the cord to the support as follows.
Hook the cord by passing its portion covered with
a poly tube through the support and tie a bowline.
Then tie the poly tube portion that is looped back
with a fastener.
3. Fix the support with bolts to the upper surface of
the boom. (2 places)
4. Fix the cord with a fastener inside the boom.
(1 place)
5. Plug the cord terminals that are of the same color.
7) Restoring the original condition
- Install the winch and the sheave at the upper side
of the boom front end to return to the original
condition.
Tightening torque for the bolts to install the winch:
126 ± 7N-m (93 ± 5 ft-lbf)
△
0
361-934-70000