Tadano TM-2000-1, Service Manual, Page: 122 / 194

AMA (Load Moment Indicator)
H - 1 H - 1 H - 1
5
W301-0320E
5
4.3 Selecting the crane model and capacity data
Select the data according to the flowchart below.
START
Set the Dip switches according to the actual crane model and capacity type.
(For the Dip switch setting that corresponds to each crane model and capacity
type, see the Table 1.)
Turn on the power supply.
Shift the rotary switch to "1".
No
Does the displayed value match the one in the "Indication 1" column in the Table 1?
Turn ON the select button. (Keep pressing it.)
No
No
Does the displayed value match the one in the "Indication 2" column in the Table 1?
Does the displayed value match the one in the "Indication 3" column in the Table 1?
Shift the rotary switch to "5".
Yes
Completed
IW301-017005
4.4 Zero-point and span adjustments of length detector .
Swing the boom to over-front before adjustment.
( Exclude the case where the direction of the boom has been decided by the inspection system etc.)
START
Turn the rotary switch to the "2" position.
Retract the boom fully and press the zero-point adjustment button.
Extend the boom fully and press the span adjustment button.
Retract the boom fully again.
Is the displayed valve within the zero-point adjustment range shown in the Table 2 ?
Yes
Completed IW301-017007
No
Table 1
Dip switch setting Indication
Condition for accuracy
confirmation
Crane model Specifications
Location of
AMA
Capacity
type
DS1 DS2 DS3
Indication
1
Indication
2
Indication
3
Outrigger
extension
Boom
Angle Load to be
lifted (Ibf.)
R1(ft.) R2(ft.) Remarks
Non-continuous 375° rotation Frame 00100000 005 Maximum 44
o
1454 70.01 73.52
Post 10100000 006 Maximum 44
o
1454 70.01 73.52
Continuous rotation
Frame 11100000 008 – – – – –
Serial No.: EX0069 and onward
Non-continuous 375° rotation
Frame 00110000 013 Maximum 44 o 1454 70.01 73.52
Post 10110000 014 Maximum 44
o
1454 70.01 73.52
TM-20110
Continuous rotation
Frame
C 00000000
11110000
0000 243 001
016 – – – – –
Serial No.: EX0141 and onward
Table 2
Zero-point adjustment range
Crane model
Boom length detector Boom angle detector
TM-20110 8.29 – 8.37 -0.2 – 0.2
[NOTE]
For Dip switch setting, “0” means OFF position and “1” means ON position.
For “Indication”, “0” means that no segments are marked up.
For the current capacity type, see the rated lifting capacity chart.
The load includes the weight of the hoisting accessory to hook block.