Tadano TM-2000-1, Service Manual, Page: 121 / 194

H - 1 H - 1
AMA (Load Moment Indicator)
4
W301-0320E
4. AMA adjustment
AMA stores capacity data for plural models of
cranes. After mounting of a crane is completed,
you must select the capacity data that correspond
to the actual model and confirm accuracy of the
data.
4.1 Attention for adjustment work
1. Set the machine level on a firm level ground with
the outriggers extended as specified.
(See the Table 1.on the next page.)
2. Remove the cover from the AMA main unit and
select the crane model and the capacity data
before confirming accuracy.
3. Run the engine at an idling speed when
performing adjustment.
4. Shift the Dip switches and the Rotary switch using
an extra thin screwdriver.
5. Do not let water enter inside of the AMA during
adjustment.
6. Keep off the buttons other than the specified
switches.
[NOTE]
For more information, refer to the next page.
4.2 AMA components
△
1
361-930-14000