Tadano TM-2000-1, Service Manual, Page: 131 / 194

AMA (Load Moment Indicator)
H - 1 H - 1
14
W301-0320E
2) Passing a pipe from the boom rear end
1. Pass a pipe from the rear end of the base boom section to the rear end of the top boom section.
Pass the pipe from the rear end of the base boom section, via the roller C and the shaded areas of the
rollers B and A, to the support at the rear end of the top boom section. It may be difficult to do this as the
inside of the boom is dark.
As the support at the rear end of the top boom section is painted in white, use it as a guide for this operation.
3) Passing a wire from the rear end of the base boom section
Pass a wire through the pipe from the rear end of the boom section to the front end of the top boom section.
Try to pass the wire as straight as possible, or it may be caught within the boom.
4) Removing the pipe
Remove only the pipe from the boom rear end while leaving the wire in the boom.