Symantec Mail Security, Administration Manual

Page: 77 / 258

77 Configuring email filtering
Assigning filter policies to a group
■
Outbound suspicious attachment message policy
■
Outbound spyware/adware message policy
8 Optionally, click View next to any policy to view details of that policy.
9 Click Save .
Note:
You cannot change virus policy details from the Edit Group page. See
“Creating virus policies” on page 83 for information about creating or editing
virus policies.
Selecting spam policies for a group
Spam policies determine what to do with inbound and outbound messages that
contain spam or suspected spam. See
“Creating spam policies” on page 85 for
information about creating spam policies.
By default, inbound and outbound spam will be marked up with [Spam] at the
beginning of subject lines, and inbound and outbound suspected spam will be
marked with [Suspected Spam]. Both types of spam will not be deleted by
default.
To select spam policies for a group
1 In the Control Center, click Policies > Group Policies .
2 On the Group Policies page, click the group for which you want to select
spam policies.
3
Click the Spam tab.
4 If desired, check Enable inbound spam scanning for this group to enable
the following two spam policies for incoming email.
5 Select the desired policy from each of the following drop-down lists:
■
Inbound spam policy
■
Inbound suspected spam policy
6 If desired, check Enable outbound spam scanning for this group to enable
the following two spam policies for outgoing email.
7 Select the desired policy from each of the following drop-down lists:
■
Outbound spam policy
■
Outbound suspected spam policy
8 Click Save .