Swatch Lasag SLS 200 CL Series, Service Instructions Manual

Page: 153 / 347

I N D U S T R I A L - L A S E R S
A COMPANY OF THE
© Lasag AG, Thun, 26.02.08 CM
Service instructions
Laser sources
8 Start-up and maintenance
of the laser source
86 . 0621 - 08 - 01
8 Start-up and maintenance of the laser source
This chapter describes to service personnel how to put LASAG laser sources into operation for the first
time and the necessary maintenance work
Table of contents
8.1 Preparation of the operator fot the start-up 2
8.2 Start-up of the laser source with service personnel 2
8.2.1 Procedure 2
8.2.2 Point of departure 2
8.2.3 Checking the main switch and emergency-off switch 2
8.2.4 Switch on the cooling unit and check it 2
8.2.5 Basic adjustment of the optical system KLS 246 and FLS 2
8.2.6 Basic adjustment for SLS 3
8.2.7 Setting up the laser source 3
8.2.8 Positioning of the protection devices in the case of a class 4 laser 4 3
8.2.9 Switch on the laser and fine-tune it 3
8.2.10 Checking the laser source 3
8.2.11 Training 3
8.3 Conclusion of the start-up 4
8.3.1 Final criteria 4
8.3.2 Conclusion of the start-up 4
8.4 Maintenance regulations 5
8.4.1 Maintenance plan for service personnel 5
8.4.2 Maintenance record for service personnel 6
8.5 Maintenance report 82.1260-02