Swatch Lasag SLS 200 CL Series, Service Instructions Manual

Page: 238 / 347

I N D U S T R I A L - L A S E R S
A COMPANY OF THE
I N D U S T R I A L - L A S E R S
A COMPANY OF THE
© Lasag AG, Thun, 26.02.08 CM
Service instructions
Laser sources
12 Description and repair NLS
86 . 0621 - 12 - 10
X14:
Pin Signal I/O Significance
Signals to the user interface
02d SS I S-Strobe for data transmission.
02z ST I T-Strobe for data transmission.
04d
bis
10z DI0
bis
DI7
I Data bits inputs
12d,z
RESIP1
RESIP2
I Free reserve inputs (potential-free).
14d DIR I Data direction for data transmission with DI/DO/SS/ST
14z OKK I OK cascading input (ext. OK).
16d,z
RESIP3
RESIP4
I Free reserve inputs (potential-free).
18d
b i s
20z
DO0
bis DO3
O Data bits outputs for data transmission.
22d
bis
24d LSTAT1
bis
LSTAT3
O
Laser Status 0
In addition to LSTAT0, 3 further conditions can be displayed.
24z RESOP0 O Free reserve inputs (potential-free).
Internal signals.
26d
bis
32z RESO6
bis
RESO13
O Free reserve outputs.
X15:
Pin Signal I/O Significance
02d TCABC I
Temperature Cabinet C
Input for NTC
02z TWAT2 I
Temperature Water 2
Input for NTC
04d LASPAR1 I Analogue input for a 1st laser parameter.
04z TCABB I
Temperature cabinet B
Input for NTC resistance.
06d,z
UL2,
UH2
I
Difference input for the measurement of the C-module voltage (charging vol-
tage, 2nd stage).
08d,z
FLOW2
FLOW2G
I Counter input for measuring the water flow, 2nd cavity.
10d USOLL2 O
Analogue output, proportional to the setpoint value of the charging voltage, 2nd
stage.
10z RSAO1 O Reserve analogue output.
12d L2 O
Charging command 2
Gives the 2nd charging unit the command to charge the C-module.
12z IMP2 O
Pulse 2
Laser pulse output, controls the 2nd GSS and with it generates the laser
pulses.