Swatch Lasag SLS 200 CL Series, Service Instructions Manual

Page: 5 / 347

I N D U S T R I A L - L A S E R S
A COMPANY OF THE
© Lasag AG, Thun, 26.02.08 CM
Service instructions
Laser sources
1 Introduction and additional
safety notices
86 . 0621 - 01 - 02
1.1 Foreword
1.1.1 Documentation overview
The user documentation consists of the following three volumes:
Operator instructions
The operator instructions are to be used by the user staff as a training and working aid for the safe and
appropriate operation and maintenance of LASAG laser sources.
Integration instructions
The integration instructions are to be used by the integration staff as a training and working aid for
- creating the customer-based installations for commissioning the laser source
- the electrical integration of the laser sources with NLS into a processing unit
- the laser-based installation of a processing unit
- the safe handling of the laser source in the other life-cycle phases
Service instructions
The service instructions describe to the service personnel the safe implementation of the commissioning
procedure and maintenance plan, the safe repair if faults should occur, and gives details of spare parts.
Customer-specific documents and updates relating to all instructions are contained in chapter 9 of the
Operator instructions.
1.1.2 Exemption from liability
LASAG AG is not liable for any faults in this documentation. Liability for direct and indirect damage arising
from the delivery or use of this documentation is excluded provided this is legally permissible.
1.1.3 Copyright
Reprinting this document, including extracts of it, is prohibited. No part of this document may be re-
produced in any form, or processed, duplicated or distributed by any means - electronic, mechanical,
photocopying, recording or otherwise - without the written permission of LASAG AG. All rights reserved,
especially the right of duplication and translation, and the patent or registration rights.