27
SV 200A User Manual
3
SV 200A CONNECTORS AND CONTROL PANELS
3.1 C
ONNECTORS PANEL
3.1.1 SIM card slot
Note: The SV 200A uses mini SIM card size (25mm x 15mm).
The SIM card should be inserted into the slot according to the drawing on the panel. Push the card in until
you feel a click.
To remove the SIM card from the slot push it until you feel the click and pull the card out. Use tweezers to
remove the SIM-card from the slot.
Further information on configuration of the 3G connection can be found in Chapter
3.1.2 DC IN socket
The
DC IN
socket is used to connect an external power source, i.e. included power supply, optional solar
panel or external 12-24 V battery.
SV 200A
can be powered using one of the following power sources:
•
Li-Ion batteries, fitted internally. Operation time with the internal Li-Ion batteries depends on the
power consumption:
➢
up to 7 days
– both modems are off,
➢
up to 4 days
2
– only 3G modem is on,
➢
up to 2.8 days
2
– only WLAN module is on,
➢
up to 3 days
2
– only LAN module is on.
•
Included AC power supply unit SB 274. Input 90-305 VAC, 15 VDC 2.7A, IP67 housing.
•
Optional solar panel. MPPV voltage 15-20 V, connected directly to SV 200A, without using power
conditioner.
•
External DC source. Voltage range 10.5 V
– 24 V, e.g. 12 V or 24 V battery.
2
One-minute data transmission with one hour cycle
WLAN Antenna
socket
GSM Antenna
socket
SIM card slot
LAN socket
DC IN socket
Multi I/O socket
