40
SV 200A User Manual
•
internal battery capacity
{
}
,
•
measurement status:
o
measurement is stopped
{
}
,
o
measurement is running
{
blinking
/
}
,
•
power source:
o
internal battery
{
}
,
o
solar panel
{
}
,
o
power supply unit or external DC source
{
}
,
o
power over Ethernet
{
}
,
o
USB power
{
}
,
•
other statuses:
o
switched on actuator
{
}
,
o
active GPS
{
, blinking when GPS is not fixed
}
.
Spectrum view mode
1/1 or 1/3 spectra are displayed for
LEQ
and
MAX
band results together with
three TOTAL values (
TOT A
,
TOT C
and
TOT Z
). The cursor shows the result
for the band or the result for TOTAL value: central band frequency, result in
dB (for LEQ spectra) and filter (A, C, B, Z) (for MAX spectra). The cursor
position can be changed with the
or
key.
Power Supply status
view
presents:
•
type of the power
Source
: internal
Battery
, power supply unit (
Mains
),
Solar
panel,
USB
or from the Ethernet (
PoE
),
•
charging
Status
:
Charging
or
Not Charging
,
•
estimated working time without charging or time to full charging of the
internal batteries
(
Time
Left
),
•
the battery
Charge
status in %,
•
battery
Capacity
in Ah,
•
battery temperature in
o
C (
Temp.
).
Communication
information
presents:
•
Interface
type:
2G/3G
,
LAN
,
WLAN
,
BT
(Bluetooth),
•
Connection
Status
:
None
(if the modem is switched off),
Init OK
(if
the modem is switched on, but there is no connection),
Internet
(if the
instrument is connected to the Internet),
Connected
(if connection
with remote peer, but not SvanNET, has been established),
SvanNET
(if the instrument has established connection with the SvanNET web-
service),
•
Signal
level (RSSI) in dBm or
None
,
•
Traffic
(amount of sent and received bytes since modem on),
•
Modem
Manufacturer
,
•
Modem
Model
,
•
Internal firmware
Revision
of the modem,
•
IMEI
number of the modem,
•
MAC
address of the WLAN module.
