80
SV 200A User Manual
•
Manage
the
instrument
remotely
(
Remote Connection Center
button)
•
Manage the instruments’ file structure
(
SVAN files
button)
•
Unload, upload and edit the instrument’s setup
files (
Setup editor
button)
•
Set the
instruments’ real time clock to be equal
with computer clock (
Update RTC
button)
•
Calibrate the instrument (
Calibration
button)
•
Check
the
firmware
updates
(
Check for Updates
button)
After pressing the
Remote Communication Center
button, the
Remote Communication Center
panel, which assures full instrument control, will appear.
9.3 C
ONFIGURING WIRELESS CONNECTION
SV 200A is equipped with internal 3G modem and LAN/WLAN module which enable wireless remote
control of the instrument and downloading measurement files, managing configuration, sending alarm
e-mails, etc. To access SV 200A remotely, the instrument first must be properly configured via the USB
connection.
All types of connections can be configured via
SV 200A instrument wizard
, which is described below,
or via the
Remote communication
tab (see Chapter
) in the
Station(s) configuration
section.
